UNIweld
UNICOweld
CHF15.60*
Prices excl. VAT plus shipping costs
Available, delivery time: Available immediately
Declaration of conformity for UNIweld - 0330 0000 02
We declare bindingly that the safety glasses comply with the relevant harmonization legislation of Regulation (EU) 2016/425 as well as the respective safety glasses standards and have been certified accordingly by a notified body as part of a type test.
Declaration of conformity (PDF)Extra information
| Area of use (lenses): | 5, 7 |
|---|---|
| Branch code: | Agriculture/Forestry/Fishery, Air conditioning technology, Construction/road construction, Craft sector, Electrical industry, Horticulture, Mechanical engineering, Metal processing industry, Temporary work, Vehicle/Aircraft construction |
| Carrying help: | Earpiece |
| Certification mark: | C3233UG |
| Colour of frame: | anthrazit |
| EN standards: | PPE Regulation (EU) 2016/425, PPE Regulation (EU) 2016/425 |
| Fields of application: | Fields of application see declaration of conformity/data sheet |
| General product properties: | corrected eye protection not possible |
| Lens typ: | Lenses with filtering action |
| Marking CE: | Yes |
| Marking on the frame: | UG 166 S CE |
| Marking on the lens: | 5 UG 1 F CE |
| Mechanical resistence: | F |
| Mechanical resistence (frame): | without |
| Norms EN (eye protection): | EN 169 |
| Notified body: | NB 0196; DIN CERTCO Gesellschaft für Konformitätsbewertung mbH; Alboinstr. 56; D-12103 Berlin |
| Period of use: | Constant use |
| Product characteristics: | Spectacles |
| Product group: | COMPLEXVISION |
| Product line: | UNICOweld |
| Risk category (PPE Regulation): | category II - Protective equipment to protect from danger |
| Size: | universal |
| Surface treatment: | Yes |
| Temple characteristics: | Adjustable temple inclination, Adjustable temple length (bit by bit or continuous) |
| Tint color: | green |
Application matrix
INFORMATION / IMPORTANT: The information provided serves only as a basis. UNICO Graber AG accepts no liability from third party recommendation on application and sale. All descriptions, data and illustrations in this printed matter are non-binding. We reserve the right to make changes for design or sales reasons.
Einsatzgebiete der Schweisserschutzfilter
| Protection shade | Application | Gases | Volume throughput l/h |
|---|---|---|---|
| 2 | Light flame-cutting work | ||
| 3 | Light flame-cutting work | ||
| 4 | Welding and brazing Cutting Flame-cutting work |
Acetylene Oxygen |
to 70 to 900 |
| 5 | Welding and brazing Cutting Flame-cutting work |
Acetylene Oxygen |
70 to 200 900 to 2000 |
| 6 | Welding and brazing Cutting Flame-cutting work |
Acetylene Oxygen |
200 to 800 2000 to 4000 |
| 7 | Welding and brazing Cutting Flame-cutting work |
Acetylene Oxygen |
800 4000 to 8000 |
| 8 | Flame-cutting work | Oxygen | 8000 |
Care and maintenance of unico graber safety spectacles
IMPORTANT: Do not use abrasives or chemicals for cleaning. Products that are too aggressive can damage the glass or its coating.
1. Remove the larger particles of dirt by running.
2. Apply some detergent, without balsam, on the glasses and rub it in gently with two fingers.
3. Rinse the detergent off by running it under luke-warm water.
4. Dab the glasses off with a soft cloth or paper towel.
5. Wipe the glasses, if necessary, with a microfiber cloth.
Some detergent and water is all you need to restore sharp vision
If you use the sleeves of your jumper or a handkerchief to clean the glass, you will leave fine scratches and traces of tiny dust particles and dirt on the glasses. These will “dull” the surfaces sooner or later. The microfiber cloths supplied with the glasses can be used for light cleaning purposes, however, if the glasses are very dirty, be sure to use fresh water.
Storing
When not in use, you should keep the safety spectacles in a suitable case, preferably a sturdy one. Never place the glasses down on the lenses. Avoid high fluctuations in temperature.